SealTite ST-90
Advanced silicone based water repeller formulation, which effectively waterproofs all types of unpainted masonry surfaces.
INTENDED USES
For application to all types of porous surfaces like plaster, concrete, cement surfaces, face bricks, natural and artificial stone, terrazzo, canvas, fibre cement and natural tiles.
DETAILS
INTENDED USES
For application to all types of porous surfaces like plaster, concrete, cement surfaces, face bricks, natural and artificial stone, terrazzo, canvas, fibre cement and natural tiles.
DETAILS
- Type: Preparation, Waterproofing
- Ranges: SealTite
- Project: Exterior
- Available-sizes: 1L, 20L, 5L
- Life expectancy: 15 / 20 years
- Superior penetrating ability
- High alkaline resistance
- Allows substrate to breathe (vapour permeable)
- Treatment is usual invisible not changing the substrate aspect
- Improves resistance to dirt pick up, fungal and algae growth
- Can be over coated with suitable coatings
- Type: Modified Silicone Solution
- Appearance: Liquid
- Colours: Clear
- Tint Bases: N/A
- Solid Approx.: 0.35
- S G at 23 °C: Approx.: 1,02
- Flash point:
- Theoretical spreading rate:
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Brush, roller or spray
- Thinning: Not recommended - ready for use
- Cleaning: Turpentine
- Drying time:
- Recoating time:
- Application: Apply a minimum of two coats
SealTite 550
Two component synthetic resin modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials.
INTENDED USES
It forms a waterproof, hardwearing and flexible cementitious coating. Provides an effective barrier to water, damp, water vapour, waterborne salts and atmospheric gases (e.g. carbon dioxide).
DETAILS
INTENDED USES
It forms a waterproof, hardwearing and flexible cementitious coating. Provides an effective barrier to water, damp, water vapour, waterborne salts and atmospheric gases (e.g. carbon dioxide).
DETAILS
- Type: Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Floor & Paving, Interior, Roof
- Available-sizes: 20kg, 6kg
- Waterproofing of all cement and plaster surfaces before tiling (e.g. shower floors, shower walls, balconies, walk and pathways etc.)
- Protection and repair of balconies, terraces and haunching concrete of roads and bridges
- Waterproofing of new and old building (internal and external)
- Applied as a waterproof slurry-coating for roofs before over coating with topcoat waterproofing system
- Waterproofing of showers
- Applied for damp proofing
- Waterproofing of tanks, containers and water reservoirs
- Potable water applications
- To reface and even out variations in concrete surfaces
- Type: Water based adhesion promoted Pure Acrylic Hybrid system
- Theoretical spreading rate: 1,8kg/m²
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing: Mixed on site with suitable paddle
- Method: Stiff brush, rubber squeegee, roller, trowel, spray
- Thinning: Do not re-temper with water
- Cleaning: Immediately after use with water, before material has set
- Drying time: 3-4 Hours
- Recoating time: 3-4 Hours
- Application: Apply a minimum of two coats
SealTite PlasterLock
A high performance versatile cement additive.
INTENDED USES
When adding SealTite Plaster Lock to a cement mixture, the result is a stronger, harder, waterproof and more flexible mixture, than when just mixing with water. Also provides superior adhesion. Specially formulated product for addition to portland cement, plaster, cement and concrete mixtures, gypsum based skimming plaster and rhinolite applications.
DETAILS
INTENDED USES
When adding SealTite Plaster Lock to a cement mixture, the result is a stronger, harder, waterproof and more flexible mixture, than when just mixing with water. Also provides superior adhesion. Specially formulated product for addition to portland cement, plaster, cement and concrete mixtures, gypsum based skimming plaster and rhinolite applications.
DETAILS
- Type: Waterproofing
- Ranges: SealTite
- Project: Exterior, Interior
- Available-sizes: 20L, 5L
- Waterproofs all cement and plaster mixtures
- By using SealTite Plasterlock, the strength of the cement or plaster mixture is increased up to 8 times compared to just using water
- Greatly improves the adhesion of the cement or plaster mixture on difficult and smooth areas such as glass, tiles, door frames and old smooth concrete or plaster
- Greatly improves flexibility of cement mixtures
- Type: SBR Cement Compatible Polymer
- Appearance:
- Colours:
- Tint Bases: N/A
- Solid Approx.:
- S G at 23 °C: Approx.: 1,09
- Flash point:
- Theoretical spreading rate: 10m²/ℓ
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Block brush or roller
- Thinning:
- Cleaning:
- Drying time:
- Recoating time:
- Application:
SealTite UltraRubber
A premium quality ultra-durable, Urethane Hybrid Nano-Polymer waterproof topcoat that forms an extremely durable and highly flexible waterproofing protective film. It is UV resistant and weather resistant.
INTENDED USES
For exterior use. Solves any decorative, protective and waterproofing problem with one product. For use on flat concrete roofs, tiled roofs, galvanized iron roofs and cromadek roofs. Also for decorative and waterproofing protection of areas such as roof ridges, parapets, skylights, flashings, joints, gaps and roof screws, gutters, flat concrete roofs, concrete slabs and tiles.
DETAILS
INTENDED USES
For exterior use. Solves any decorative, protective and waterproofing problem with one product. For use on flat concrete roofs, tiled roofs, galvanized iron roofs and cromadek roofs. Also for decorative and waterproofing protection of areas such as roof ridges, parapets, skylights, flashings, joints, gaps and roof screws, gutters, flat concrete roofs, concrete slabs and tiles.
DETAILS
- Type: Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 1L, 20L, 5L
- 100% waterproof
- UV-resistant
- Excellent flexibility
- High solids
- Eco friendly
- For most roof types (excluding slate tiles and shingle type roofs)
- Type: Urethane Hybrid Nano-Polymer
- Appearance: Sheen Finish
- Colours: White and standard colour
- Tint Bases: N/A
- Solid Approx.:
- S G at 23 °C: Approx.: 1,24
- Flash point:
- Theoretical spreading rate: 6m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Brush, roller or spray
- Thinning: Not recommended - ready for use
- Cleaning: White spirits
- Drying time: 2-4 Hours
- Recoating time: 2-4 Hours
- Application: Apply a minimum of two coats
SealTite Duramesh
Stitch-bonded polyester.
INTENDED USES
Used to increase tensile and add strength to moving joints and flashings.
DETAILS
INTENDED USES
Used to increase tensile and add strength to moving joints and flashings.
DETAILS
- Type: Preparation, Waterproofing
- Ranges: SealTite
- Project: Exterior
- Available-sizes: 1mtr x 10mtr, 200mm x 20mtr
- Excellent for flashing details
- Metal roof seams
- Inside and outside flashing details, round stacks, pipe legs, pitch pots, conduit pipes, expansion joints
- Type:
- Appearance:
- Colours:
- Tint Bases: N/A
- Solid Approx.:
- S G at 23 °C:
- Flash point:
- Theoretical spreading rate:
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method:
- Thinning:
- Cleaning:
- Drying time:
- Recoating time:
- Application:
SealTite MaxPly
A high strength-bonding adhesive for bonding SealTite Duramesh Membrane to flat concrete roof surfaces.
INTENDED USES
Used as part of the SealTite Waterproofing System on flat concrete roofs.
DETAILS
INTENDED USES
Used as part of the SealTite Waterproofing System on flat concrete roofs.
DETAILS
- Type: Preparation, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 20L, 5L
- Type: Urethane Hybrid Bonding Adhesive
- Solid Approx.: 73% by mass
- S G at 23 °C; Approx.: 1,34 (Typical)
- Theoretical spreading rate: 2m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Brush, roller
- Thinning: Not recommended - ready for use
- Cleaning: White spirits
- Drying time: 2 Hours
- Recoating time: 2 Hours
- Application: Apply 1 coat
SealTite Prembond
A primer for binding loose, powdery and unsound surface.
INTENDED USES
Used as part of the SealTite Waterproofing System on flat concrete roofs.
DETAILS
INTENDED USES
Used as part of the SealTite Waterproofing System on flat concrete roofs.
DETAILS
- Type: Preparation, Primer & Sealer, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 20L, 5L
- Type: Nano-Tech Solution Polymer
- S G at 23 °C: Approx.: 1,15
- Theoretical spreading rate: 8m²/ℓ
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Brush and roller
- Thinning: Not recommended - ready for use
- Cleaning: White spirits
- Drying time: 1 Hours
- Recoating time:
- Application: Apply 1 coat
SealTite Fiber Seal
High solids and fiber-reinforced pure acrylic emulsion waterproofing with built-in membrane. With a high fiber content, high flexibility and excellent durability, this product will have a long lifespan. It is UV and weather resistant.
INTENDED USES
For all types of roofs, roof ridges, parapets, skylights, joints, gaps and roof screws, gutters, flat concrete roofs, concrete slabs and tiles. Also recommended as a wall coating (textured finish).
DETAILS
INTENDED USES
For all types of roofs, roof ridges, parapets, skylights, joints, gaps and roof screws, gutters, flat concrete roofs, concrete slabs and tiles. Also recommended as a wall coating (textured finish).
DETAILS
- Type: Acrylic, Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 1L, 20L, 5L
- Fiber-reinforced pure Acrylic
- Waterproofing with built-in membrane
- High fiber content
- High flexibility
- Excellent durability
- Long lifespan
- UV and weather resistant
- Type: High solids and fibre-reinforced pure acrylic emulsion waterproofing with build-in membrane
- Colours: White and standard colours
- Theoretical spreading rate: 1-2m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing: Stir thoroughly with a flat paddle
- Method: Brush
- Thinning: Not recommended - ready for use
- Cleaning: Water
- Drying time: 3 - 4 Hours
- Recoating time: 3 - 4 Hours
- Application: Apply a minimum of two coats
Sealtite Backfill & Foundation Compound
Highly flexible 100% waterproofing compound.
INTENDED USES
For waterproofing of backfill areas, foundation areas and retaining walls.
DETAILS
INTENDED USES
For waterproofing of backfill areas, foundation areas and retaining walls.
DETAILS
- Type: Preparation, Waterproofing
- Ranges: SealTite
- Project: Exterior
- Available-sizes: 20L, 5L
- Type:
- Appearance:
- Colours:
- Tint Bases:
- Solid Approx.:
- S G at 23 °C:
- Flash point:
- Theoretical spreading rate:
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method:
- Thinning:
- Cleaning:
- Drying time:
- Recoating time:
- Application:
Sealtite Parapets Sealer
A high strength bonding adhesive for bonding SealTite Duramesh Membrane to the top of parapet and boundary wall surface.
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
- Type: Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 1L, 5L
- Type: Urethane Hybrid Bonding Adhesive
- Solid Approx.: 73% by mass
- Theoretical spreading rate: 2m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing:
- Method: Block brush or roller
- Thinning: Not recommended - ready for use
- Cleaning:
- Drying time: 2 hours
- Recoating time:
- Application: Apply a minimum of two coats
A high strength bonding adhesive for bonding SealTite Duramesh Membrane to the top of parapet and boundary wall surface.
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
- Type: Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 1L, 5L
A high strength bonding adhesive for bonding SealTite Duramesh Membrane to the top of parapet and boundary wall surface.
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
INTENDED USES
Used together with SealTite Duramesh Membrane and SealTite MagMar as topcoat. Used as part of the SealTite waterproofing system on top of parapets and boundary walls.
DETAILS
- Type: Roof Paint, Waterproofing
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 1L, 5L
Sealtite Roof Rescue
A solvent-based primer and sealer, modified with coal-tar that completely inhibits rust.
INTENDED USES
It can be applied to clean new or old metal surfaces or to protect surfaces against further rust and corrosion.
DETAILS
INTENDED USES
It can be applied to clean new or old metal surfaces or to protect surfaces against further rust and corrosion.
DETAILS
- Type: Metal Coating, Primer & Sealer
- Ranges: SealTite
- Project: Exterior, Roof
- Available-sizes: 20L, 5L
- Anti-corrosive
- Seals light rust
- Coal-tar based
- Lead free
- Type: Coal-tar
- Appearance: Low Sheen
- Colours: Black
- Tint Bases: N/A
- Solid Approx.:
- S G at 23 °C: Approx.: 1,15
- Flash point: Flammable
- Theoretical spreading rate: 8-10m²/ℓ per coat
- Practical spreading rate: The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used
- Mixing: Stir thoroughly with a flat paddle
- Method: Brush or roller
- Thinning: Not recommended - ready for use
- Cleaning: Enamel QD Thinners
- Drying time: 12 Hours
- Recoating time:
- Application: Apply a minimum of two coats
- Related products
