MetalRite Rust Remover
This is a double strength rust remover that cleans, de-rusts and phosphates metal. It can be used on all metal articles, roofs, fences, gates, burglar bars, handrails, structural steel, outdoor structures etc.
INTENDED USES
INTENDED USES
- Cleans & removes rust and restores surfaces
- Use on mild steel, galvanized iron, chromadek, aluzinc & IBR
- Type: Preparation, Preparation, Stripper & Cleaner
- Ranges: MetalRite
- Project: Interior / Exterior
- Available-sizes: 1L, 5L
- It dissolves rust.
- Retards further rusting, which prolongs metal life.
- Prepares surface for paint, by providing a bond between the metal surfaces and the paint.
- Appearance: Opaque
- Density: 1.175
- A concentrated solution: Add water.
- Dipping add 3-4 parts water.
- Brushing add 2-3 parts water.
- Above depends upon the amount of rust and dirt on the surfaces
MetalRite Galvanized Iron Cleaner
This is the most effective way to prepare galvanized iron for painting. It removes the fat/oily layer on galvanizing and forms a substrateon which paint will successfully adhere. It prevents the common problem of paint peeling on new and weathered galvanized iron steel, gutters and downpipes etc.
INTENDED USES
- Cleans, degreases & preparessurfaces for painting
- Use on new & weathered galvanized iron, mild steel, chromadek, aluzinc & IBR
- Type: Preparation, Stripper & Cleaner
- Ranges: MetalRite
- Project: New and weathered galvanized iron steel, gutters and downpipes etc.
- Available-sizes: 1L, 5L
- Effectively removes fat and oil.
- Prepares iron for paint.
- Creates a surface to which paint will adhere. Prevents paint peeling.
- Appearance: Clear
- Type: Liquid cleaner
- Mixing: Shake well before use
- Method: Brush, broom, or cloth
- Thinning: Not recommended
- Cleaning: Water
MetalRite Anti-Rust
This metal protection is a high-performance, anti-rust, metal etch primer. It’s formulated with anti-corrosive zinc phosphate pigments that prevents the development of rust. Suitable for use on new and rusted metal surfaces.
INTENDED USES
INTENDED USES
- Universal — can be used to prime a variety of metal surfaces.
- Superior anti-rust coating for new or rusted metal.
- Suitable for domestic, industrial and automotive application, for the priming of gates and palisade fencing, balustrades, gutters, steel, industrial steel framing, farm implements, tanks, corrugated roofs, window and door frames.
- Type: Water based metal primer
- Ranges: MetalRite
- Project: New and rusted metal surfaces.
- Available-sizes: 1L, 5L
- Superior corrosion resistant formula — contains zinc phosphates.
- Quick-drying (can be handled within an hour).
- Water based.
- Easy-to-use. Clean-up with water.
- Excellent flow and leveling properties, provides a smooth surface for painting.
- Excellent sanding and top coat adhesion.
- Non-toxic fumes (can be used in a confined space).
- Non-flammable and environment friendly.
- Water based anti-rust primer
- Excellent adhesion
- For new or weathered mild steel, galvanized iron, chromadek, aluzinc & IBR.
- Stir thoroughly with a flat paddle.
- Apply by using a brush, roller or spray.
- Allow to dry 1 hour before applying the 2nd coat.
- For best results always apply two coats of Metalrite Galvanized Cleaner and cover with two coats of topcoat like Metalrite Metal Topcoat MR600.
MetalRite Coast Prime
This is an anti-corrosive acid etch primer for all clean galvanised iron and non-ferrous metals. A Pre-treatment primer for new steel surfaces, clean galvanized steel, roof metal sheet and Chromadek. Contains Zinc Phosphate which provides excellent anti-corrosive properties. It may be over-coated with a wide range of topcoats such as alkyds, vinyl and water-based acrylic paints. Ideal for use on vehicle chassis and under body components, engine parts, gates, palisade fencing, metal fireplaces, and burglar bars and security gates.
INTENDED USES
INTENDED USES
- For coastal & inland conditions
- Excellent anti-rust primer
- Excellent durability & adhesion
- For new & weathered mild steel, galvanised iron, chromadek, aluzinc & IBR.
- Dries to a hardwearing primer
- Interior and exterior use
- Type: Solvent based metal etch primer
- Ranges: MetalRite
- Project: New & weathered mild steel, galvanised iron, chromadek, aluzinc & IBR.
- Available-sizes: 1L, 5L, 20L
- Superior corrosion resistant formula — contains zinc phosphates.
- Quick-drying (can be handled within an hour).
- Water based.
- Easy-to-use. Clean-up with water.
- Excellent flow and leveling properties, provides a smooth surface for painting.
- Excellent sanding and top coat adhesion.
- Non-toxic fumes (can be used in a confined space).
- Non-flammable and environment friendly.
- Solvent based metal etch primer
- Excellent anti-rust primer
- Excellent durability & adhesion
- For new & weathered mild steel,galvanized iron, chromadek, aluzinc & IBR.
- Apply two coats direct to prepared surface.
MetalRite Top Coat
This is a water based, polyurethane acrylic enamel paint for metal. It combines the toughness and strength of polyurethanes with the excellent weather resistance for acrylic, forming a long lasting hard finish.Used together with a suitable primer to protect metal surfaces from rust for years.
INTENDED USES
INTENDED USES
- Protection and decoration of interior and exterior metal surfaces.
- Universal topcoat for all metal surfaces.
- For new or previously painted metal surfaces.
- For doors, window frames, garden equipment, gutters, downpipes, gates, fences,handrails, furniture and cabinets, steel poles, structural steel and other metalwork.
- Type: Water based polyurethane
- Ranges: MetalRite
- Project: New or previously painted metal surfaces
- Available-sizes: 1L, 5L, 20L
- Water based
- Washable
- Non-drip
- Rust protection
- Anti-corrosive topcoat
- Dries to a tough durable finish with good weather resistance
- Low VOC’s
- Non-yellowing Low odour
- Provides a smooth semi-gloss finish
- APPEARANCE: Satin
- DURABILITY: Excellent
- DRYING TIME: Touch dry 30min – 1 hour
- RECOAT TIME: 4 Hours
- SPREADING RATE: 10m2/litre
- CLEANING: Water
- APPLICATION METHOD: Brush, roller or spray
- THINNING Not recommended
- Ensure all surfaces are thoroughly clean, sound, dry and free from any contamination such as dirt, rust salt, algae and grease.
2in1 QD Enamel, Top Coat & Primer
This is a superior-quality, quick-drying enamel paint. It is extremely durable and ideal for application on palisade fencing, garden furniture, general metal work, metal gates, steel structures, farm implements, etc.
INTENDED USES
INTENDED USES
- For application to suitably primed metal.
- Trucks, tractors, automotive chassis, components, load bodies.
- Farm and earthmoving equipment. Plant/factory machinery and equipment.
- Steel structures, security gates, and burglar bars.
- Steel-cabinets, lockers, shelves. Indoor and outdoor steel furniture Ideal for trimming.
- Type: Enamel, Metal Coating
- Ranges: MetalRite
- Project: Interior / Exterior, Metal & steel surfaces & structures
- Available-sizes: 1L, 5L
- Topcoat & primer all in one.
- Dries to a hard wearing finish.
- Excellent flow and leveling.
- Hard and tough finish.Quick-drying.
- Interior and exterior use.
- TOUCH DRY: 30 Minutes
- RECOAT TIME: 1 Hours
- DRY TO HANDLE : 4 Hours
- SPREADING RATE: 8-12m²/litre
- CLEANING: E Thinners
- APPLICATION METHOD: Brush, roller or spray
- THINNING: Not recommended
- Apply first coat unthinned.
- Apply the second coat unthinned.
MetalRite TTT Truck, Tractor & Trailer
This is a superior quality, fast drying high gloss enamel paint. It is extremely durable and ideal for application on general metal and iron work. It is ideal for a finishing coat on trucks, tractors, trailers, and farm implements.
INTENDED USES
INTENDED USES
- Finishing coat on trucks, tractors, trailers, and farm implements.
- Ideal for high volume applications on palisade fencing, garden furniture, carports, burglar bars, gates or steel structures.
- Type: Fast drying high gloss enamel top coat
- Ranges: MetalRite
- Project: Finishing coat for trucks, tractors, trailers & arm implements.
- Available-sizes: 1L, 5L
- Dries to a hard-wearing finsih.
- High film build.
- Hard and tough finsih.
- Excellent flow and levelling.
- Fast drying.
- Interior and exterior use.
- TOUCH DRY: 2 hours at 23ºC.
- RECOAT TIME: 4 hour at 23ºC
- (Drying times will be extended during cold, wet or humid conditions.)
- SPREADING RATE: 8-12m²/litre
- CLEANING: E Thinners
- APPLICATION METHOD: Brush, roller or spray
- THINNING: Not recommended
- Apply first coat undiluted.
- Apply the second coat undiluted.
MetalRite Hammered
Is a single pack, air drying, anti-rust / corrosion resistant primer (undercoat and topcoat all in one) with a hammered decorative finish. It is based on specialized resins and is suitably pigmented for ideal weathering properties. This fast drying and hardwearing coating provides multi-coat applications for ferrous and non-ferrous metals. It has excellent wetting properties making it tolerant to poorly prepared ferrous surfaces.
INTENDED USES
INTENDED USES
- Can be used as a primer, undercoat and topcoat.
- Type: 2in1 Primer and Topcoat
- Ranges: MetalRite
- Project: Interior and exterior use
- Available-sizes: 1L, 5L
- Ultra-tough
- Quick drying
- Repelling water
- Anti-Corrosive Stops Rust
- Direct to metal application
- Excellent weather resistance
- Interior and exterior use
-
APPEARANCE: Smooth gloss with hammered pattern
-
DURABILITY: Excellent
-
DRYING TIME : Touch/Surface Dry: 1-2 hours
-
RECOAT TIME: 4 Hours at 25˚C
- Apply first and second coat undiluted.
- A third coat may be required for aggressive industrial environments or coastal areas.
